Headphones Support
Table of Contents
1.Volume +
2.Volume -
3.On/off
4.LED indicator
5.Micro-USB charging port
6.Microphone
Pairing
While off, press and hold On/Off button for 5 minutes until you see alternative red/blue flash accompanied with a voice prompt “pairing”.
Connecting your cellphone
Turn on the bluetooth switch on your cellphone and click “Beyond5” to pair with the headset. Enter “0000” if password is required. A voice prompt “Your device is connected” can be heard when pairing has succeeded.
Multipoint connection
Multipoint connection mode allows you to connect two bluetooth devices to Beyond5 simultaneously and switch between two devices seamlessly.
- Refer to Configure your Beyond5 step and connect Beyond5 to your first device.
- Turn off the bluetooth of the first device and connect Beyond5 to your second device.
- Turn on bluetooth of the first device and choose Beyond5 to connect.
·Note:
- FM module and bluetooth connectivity module are two separate and independent modules. It’s necessary to turn off the FM module if you are not listening to it as FM function will not automatically switch off while turning off the bluetooth module or during standby mode. If accidentally turned on, the FM function will not power off until the battery drains.
- “Bluetooth first”: when FM mode is on, if there is sound transmitted through bluetooth module, FM will be overridden and only sound transmitted through bluetooth will be heard. When there is no sound transmitted through bluetooth, FM will be back on.
·Turn on FM mode: When FM is turned off, press and hold + and – buttons for 2 seconds until green led is flashing slowly.
·Turn off FM mode: When FM is turned on, press and hold + and – buttons for 2 seconds until green led is off.
·FM volume adjustment: Press – button to turn down the volume and press + button to turn up the volume.
·Channel switching: Press and hold + button for 2 seconds to switch to higher frequencies and – button for 2 seconds to switch to lower frequencies.
Turn on
Press and hold on/off button for 1 second
Hello
Turn off
Press and hold on/off button for 2.5 second
Goodbye
Play/Pause music
Press on/off button
N/A
Switch music
Press and hold -/+ button for 2 seconds
N/A
Adjust volume
Press -/+ button
Beep
Answer/End a call
Press on/off button
Beep
Reject a call
Press and hold on/off button for 1 second
Beep
Answer the second incoming call and end the current call
Double press on/off button
N/A
Answer the second incoming call and hold the current call
Double press on/off button
N/A
Redial last number
Double press on/off button
Beep
Turn on/off FM mode
Press and hold + and - buttons for 2 seconds
N/A
Switch FM channels
Press and hold + or - button for 2 seconds
N/A
Factory reset
Press and hold + and on/off buttons for 5 seconds
Beep beep
Model
Beyond5
Frequency Range
20Hz～20KHz
Microphone Sensitivity
-40±3dB
Bluetooth protocol
A2DP、HSP、HFP
Battery
Lithium
Standby time
12 days
Weight
38g
Speaker
Bone conduction speaker
Bluetooth range
10 meters
Bluetooth version
Bluetooth v4.1
Music continuous playing time
8 hours
Charging time
2 hours
Waterproof rating
IP67
Max charging voltage
5.25V
Not connected
Red (slow flash)
Pairing Mode
Red and blue (flash alternately)
Charging
Red light on
Charging complete
Blue light on
Call out / Incoming calls
Blue (flash) / Caller’s numbers announcement
Call connected
Blue (slow flash)
Battery low
Battery low
Disconnected
Your device is disconnected
FM mode on
Green (slow flash)
- Store the headset in cool and dry place. The working temperature should be -10~+50℃. Using the headset in too cold/hot environment or highly humid area will shorten the battery life.
- Recharge the headset after you leave it unused for a long period.
- Clean the headset with soft cloth.
- Ensure the USB cover is completely covered to protect against water when wearing the headset.
- It is not recommended to wear headset to shower or swim to avoid breakdown when the USB cover is not completely covered.
- Keep the charging port dry before charging the headset to reduce damaging risks.